Dual-Channel + AFG Digital Storage Oscilloscope 150MHz 1GSa/s Signal Generator Oscilloscope 2 In 1

Save $150.00

Price:
Sale price$349.99 Regular price$499.99

Description

  • ESTIMATED DELIVERY TIME -US......(10-15 Days)

  • Sample rate:1GSa/s (single channel) 500MSa/s (two channels)
  • Sampling:Sample data
  • Peak-to-peak value:Display high frequency and random burr
  • Average:Average waveform, times:  4, 8, 16, 32, 64, 128
  • High resolution:Up to 12bit
  • Input coupling:DC, AC, GND
  • Input impedance:1MΩ±2% ‖20pF±3pF
  • Probe attenuation  factor:1X, 10X, 100X, 1000X
  • Voltage classes:300V CAT II
  • Maximum input voltage:300VRMS (10X)
  • Waveform interpolation:(sin x)/x
  • Maximum record length:Single channel maximum 8M
  • Horizontal scale range:2ns/div~100s/div  1, 2, 5 step by step
  • Time base mode:Y-T, X-Y, Roll 
  • Zero offset:±0.5 div×minimum time base gear
  • Sample Rate and Delay Time Accuracy:±25ppm
  • Clock drifting:≤±5 ppm/year
  • Increment Time Measurement Accuracy:single, ''acquisition'' mode
  • (Full Bandwidth):±(1 sample interval+100ppm×reading+0.6ns)
  • Sample Rate and Delay Time Accuracy:±50ppm(at any interval greater than 1ms)
  • Vertical resolution:8 bits resolution, each channel samples simultaneously
  • Vertical sensitivity:2mV/div to 10V/div
  • Offset range:2mV/div to 20mV/div, ±100mV; 50mV/div to 200mV/div, ±1V;
  • Mathematical operation:+, -, ×, ÷, FFT
  • FFT:Window: Rectangular, Hanning, Hamming, Brackman, Bartlett, flat top window
  • Bandwidth Limit:20MHz
  • Bass response(-3db):In BNC position ≤ 10Hz
  • Vertical gain accuracy:In ''normal''  or ''average'' acquisition mode, the accuracy of 10V/div to 10mV/div is ±3%;
  • DC offset accuracy:±0.1 div±2 mV±1% offset value
  • Voltage measurement repeatability, average acquisition mode:Under the same setting and environment, ≥16 waveforms are sampled, △V of any two averages: ±(3%×value+ 0.05 div)
  • Trigger type:Edge, Pulse width, Video, Slope, Overtime, Window, Pattern, Interval, Delay, UART, LIN, CAN, SPI, IIC
  • Trigger level range:±5 divisions from the center of the screen
  • Trigger mode:Auto, general, single
  • EXT:0~3.3V
  • Holdoff range:8ns~10s
  • EXT:±(Set value× 6%+40mV)
  • Signal source:CH1, CH2, EXT
  • Condition(When):<, >, !=, =
  • Signal source:CH1~CH2,
  • Pulse width range:8ns ~ 10s
  • Accuracy:8ns
  • Signal source:CH1~CH2
  • Synchronization:Scanning line, line number, odd field, even field, all field
  • Condition(When):<, >, !=,  =
  • Signal source:CH1 ~ CH2
  • Time range:8ns ~ 10s
  • Accuracy:8ns
  • Polarity:Positive polarity, negative polarity
  • Time range:8ns ~ 10s
  • Accuracy:8ns
  • Level(signal source):CH1~CH2
  • Condition(When):<, >,  !=,  =
  • Signal source:CH1~CH2
  • Time range:8ns ~ 10s
  • Accuracy:8ns
  • Condition(When):<, >, !=, =
  • Signal source:CH1~CH2
  • Time range:8ns ~ 10s
  • Accuracy:8ns
  • Signal source(RX/TX):CH1~CH2 
  • Data format:Hex (hexadecimal)
  • Data length:1 byte
  • Data bit width:5 bit, 6 bit, 7 bit, 8 bit
  • Odd-even check:none, odd, even
  • Free level:high, low
  • Baud rate (optional):110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
  • Baud rate(user-defined):300bit/s~334000bit/s
  • Signal source:CH1~CH2
  • Data format:Hex (hexadecimal)
  • Baud rate (optional):110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
  • Baud rate(user-defined):300bit/s~334000bit/s
  • Signal source:CH1~CH2
  • Data format:Hex (hexadecimal)
  • Baud rate (optional):10000, 20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000, 1000000
  • Baud rate(user-defined):5kbit/s~1Mbit/s  
  • Data format:Hex (hexadecimal)
  • Data bit width:4, 8, 16, 24, 32
  • Data format:Hex (hexadecimal)        
  • Data index:0~7
  • Opportunity(condition):Start bit, stop bit, no response, address, data, restart
  • Cursor:Voltage difference between cursors △V
  • Measurement type:DC effective value
  • Frequency meter:hardware 6 bits frequency meter
  • Channel:1
  • Sample rate:200MSa/s
  • Vertical resolution:12 bits 
  • Maximum frequency:25 MHz 
  • Standard waveforms:sin、square, pulse, triangular, sampling wave, index, noise
  • Arbitrary waveform:Arb1, Arb2, Arb3, Arb4
  • Noise:  
  • Waveform length:8KSa
  • Resolution:0.1 Hz or 4 bits,take the greater one
  • Resolution:100 μV or 3 bits, take the greater one
  • Accuracy:2% (1 kHz)
  • Output impedance:50 Ω
  • Display resolution:800 (horizontal)*480 (vertical) pixels
  • Display colour:16 million colours (24 bits true colour)
  • Persistence time:minimum, 1 s, 5 s, 10 s, 30S, infinite
  • Display type:dot, vector
  • Display brightness:adjustable
  • Grid type:adjustable
  • Grid brightness:adjustable
  • General specifications:Probe compensator output
  • Output voltage, typical:about 2Vpp input ≥1MΩ load
  • Frequency, typical:1kHz
  • Power supply:100-120VACRMS(±10%), 45Hzto 440Hz, CATⅡ
  • Power consumption:<30W
  • Fuse:T, 3.15A, 250V, 5x20mm
  • Operating temperature:0~50 °C (32~122 °F)
  • Storage temperature:-40~+71 °C (-40~159.8 °F)
  • Humidity:≤+104℉(≤+40°C): ≤90% relative humidity
  • Nonoperating:2.46g RMS from 5Hz to 500Hz,
  • Operating:50g, 11ms, half-sine wave
  • Weight:2900g
  • Payment & Security

    American Express Apple Pay Diners Club Discover Facebook Pay Mastercard PayPal Shop Pay Venmo Visa

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Estimate shipping

    You may also like

    Recently viewed